| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, form D only |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website, This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing type | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Aluminum only per RCI 432490 |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, form D only |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Non-Destructive Testing | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: Type I, Method A, form D only |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: Limits: Approval and Fracture Critical authorization based on QCS-001 and subject to the limitations listed on the QCS-001 website |
| LMA-PG001 | Etch/Cleaning Prior to Penetrant Inspection | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website |
| LMA-PJ013 | Touch-up Requirements for Chemical and Organic Finishes | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website |
| LMA-PJ264 | Application and Control of Organic Finishes | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Aluminum only. Alternate method per RCI 645388 |