| Specification | Process Description | Category | Limits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: None |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Limited to Grit Blasting for Oxide Removal. |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Method A Only |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1, Type 2 or Type 6 only |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Non-Destructive Testing | Limits: Limits: In House Testing only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| FP-153 | Primer MIL-P-85582, Epoxy, Voc Compliant, Application of | Chemical Processing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Air dry only |
| GSS 4407 | Application of Lacquers: Acrylic | Chemical Processing | Limits: Supplier is utilizing GSS 4510 as an approved substitute per GS30AB |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: Limits: Method A only |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: None |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: Dry Film Lube Superseded by AS5272 for Ty I & II only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Limits: Limited to Type II process with dilute chromic seal for HALE, E-2C/D and Fire Scout |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Alternate solutions approved per RCI R116999 |
| MPD 1103 | Cleaning of Titanium and Titanium Alloys | Chemical Processing | Limits: None |