| Specification | Process Description | Category | Limits |
| ACS-PRS-1008 | Forming & Straightening of Titanium and Titanium Alloys. “Suppliers limited to cold forming of titanium per ACS-PRS-1008 are not required to be approved by NGC provided all stress relief operations are performed by an approved supplier to AMS2801.” | Miscellaneous | Limits: None |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Aluminum only |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, Level 3, Form d only. |
| AMS 2770 | Heat Treatment of Wrought Aluminum Alloy Parts | Heat Treat | Limits: None |
| AMS 2801 | Heat Treatment of Titanium Alloy Parts | Heat Treat | Limits: Stress relief only |
| AMS-H-81200 | Heat Treatment of Titanium and Titanium Alloys | Heat Treat | Limits: Stress relief only |
| ASTM B600 | Descaling & Cleaning Titanium and Titanium Alloy Surfaces | Chemical Processing | Limits: Limited to Pre-Cleaning of titanium as req'd per AMS-2801 |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: Type I, Method A, Level 3, Form d only. Excludes Appendices |
| GSS 5150 | Heat Treatment of Titanium and Titanium Alloys | Heat Treat | Limits: No Vacuum Degassing |
| GSS 5360 | Forming of Titanium and Titanium Alloys | Miscellaneous | Limits: None |
| GSS 7015 | Cleaning and Descaling of Titanium and Titanium Alloys | Chemical Processing | Limits: Pre-cleaning of materials using only Acetone per RC/I 430441 & 432040 |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Type I only |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Etch per RCI 448541 |