| Specification | ProcessDescription | Category | SpecLimits |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing types | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum and Titanium processing only |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Limited to Type I; Grit Blasting and Acid Etching only |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Limitation: Not Approved for Appendix B |
| AMS 2430 | Shot Peening, Automatic | Miscellaneous | Limits: None |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1, Type 2 & 6 only |
| ASTM B600 | Descaling & Cleaning Titanium and Titanium Alloy Surfaces | Chemical Processing | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum Only |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: Air-cure only |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Air-cure only |
| GSS 7021 | Acid Cleaning of Ferrous Alloys | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: Includes fracture critical hardware. Facility qualification was conducted 11/19-20/2024. Based on the requirements called out in LMA-PC201, Appendix A. The following personnel successfully completed qualification demonstration: Kirk Davis..stamp # 4 Steven Penne…stamp # P28, Vany Nann..stamp # P24 This task was accomplished using procedure PI-26, Revision 12/30/2021, and PI-26M Lockheed Addendum, Revision 1/27/2022. .Expires 11/2027.Next Requalification: 11/19/2027 |
| LMA-PG001 | Etch/Cleaning Prior to Penetrant Inspection | Chemical Processing | Limits: Titanium only per RCI #916938 |
| LMA-PH016 | Conversion Coating of Titanium Alloys | Chemical Processing | Limits: None |
| LMA-PJ264 | Application and Control of Organic Finishes | Chemical Processing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Not approved for Type I; 5% sodium or potassium dichromate seal is required when Mil-PRF-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings |